Skip to the page
Compare quotes from local specialists in Sacramento
SACRAMENTO HEATING AND AC Get my quote
Insulated flexible ductwork running through an attic

Prices ยท Sacramento

HVAC ductwork installation cost in Sacramento

Fixr puts ductwork installation at about $1,436 to $17,149, with an average near $9,293, and duct repair at $200 to $1,000. This page shows what moves the price and what to ask.

  1. Tell us about the job. One short form, about two minutes.
  2. A local specialist gets in touch. They ask a few questions and quote.
  3. It is your call. Accept a quote, or don't.

Get a price for your HVAC repair job

Fill this in and a local specialist gets back to you to quote.

So the business can look at the job and price it.

Installing ductwork typically costs about $1,436 to $17,149, with an average near $9,293, according to Fixr's ductwork cost guide, checked in November 2026. Replacing existing ducts means the old ones have to come out first, which adds work. The price follows the length of duct, the material, and how easy it is to reach. Poor ducts cause weak airflow, uneven rooms and higher bills, so the cost often buys comfort as well as new metal. See ductwork and airflow for repairs. A local specialist quotes the real price after measuring your home.

How much does ductwork installation cost?

Ductwork installation typically costs about $1,436 to $17,149 in Fixr's guide, with an average near $9,293. The cost depends on home size, the number of vents and the path the ducts must take, so layout matters more than square footage alone. Repairing existing ducts costs far less, about $200 to $1,000 with an average near $600.

Job Typical cost
Ductwork installation $1,436-17,149 (average about $9,293)
Ductwork repair $200-1,000 (average about $600)

These ranges are national figures from Fixr, and they are wide because the details of each home vary so much. A specialist can measure your home and give a quote. For a price on a specific job, such as replacing one section, ask for a written quote.

What materials are ducts made from?

Ducts are commonly made of sheet metal or flexible insulated duct. Sheet metal is rigid and durable and is usually the more expensive material. Flexible duct is lighter and easier to route, but it can be damaged more easily. Ask the specialist which material they are quoting and why, since material is one of the main things that sets the price.

Ducts can also be insulated or uninsulated, and insulated ducts cost more but lose less heat or cold on the way to the vents. A cost calculator can help you prepare questions, but it cannot see your attic, your walls or the number of vents, so rely on a written quote for the real number.

What pushes the price up or down?

Duct location, home layout, material and the number of vents set most of the cost. Ducts in an attic or basement are the easiest to reach. Crawl spaces, walls and floors between stories take more labor, especially when drywall has to be cut and repaired afterward. Each vent adds a separate duct run.

Other things that change the quote:

  • Replacement or new install. Removing old ducts adds time and disposal.
  • Material. Sheet metal usually costs more than flexible duct.
  • Insulation. Insulated ducts cost more but lose less heat or cold.
  • Equipment changes. A new furnace, air handler or heat pump may need different duct sizes. See HVAC system installation cost.
  • Access. Tight spaces and finished ceilings raise labor.

What does duct repair cost, and is it better than replacement?

Repair is often cheaper than replacement when the ducts are mostly sound. Fixr puts duct repair at $200 to $1,000, with an average near $600, depending on the number and location of leaks. A specialist can inspect the ducts and tell you whether sealing, a section replacement or full replacement makes sense, and quote each.

ENERGY STAR says leaky ducts can reduce heating and cooling efficiency by as much as 20 percent, and that sealing and insulating ducts can improve comfort and often pays for itself. It also says leaks from gas appliances can draw combustion gases back into living spaces. If a carbon monoxide alarm sounds, leave the home and call 911. Compare repair prices on our HVAC repair cost page, and read about common ductwork and airflow problems in AC running but not cooling.

What if I have an old house with no ducts?

Installing ducts in an old house with none can be a large job because ducts need a path through walls, ceilings or floors. A retrofit means cutting and patching, and sometimes building soffits or chases to hide the ducts. Some homes cannot fit full ductwork, so ask a specialist what is possible in yours.

Older bungalow room with wood floors and a floor register

If the cost is too high, a ductless system skips the ducts altogether. See ductless mini split installed cost. In Sacramento, summers are hot, with a July average high of about 92.6 F (NOAA 1991-2020 normals, Sacramento Executive Airport), so ducts running through a hot attic should be insulated. Ask the specialist where each duct will run and how they will protect it.

How do you compare ductwork quotes?

Ask each specialist for a written quote that lists the length of duct, the material, the insulation, the number of vents and any wall or ceiling repair. Compare the same scope. A low quote may leave out insulation, removal of old ducts or patching, and a high quote may include equipment changes you do not need.

Ask how they sized the ducts and whether they will test airflow afterward. Ask what the warranty covers on materials and workmanship and get it in writing. C-20 is the CSLB classification for warm-air heating, ventilating and air-conditioning work. Ask any specialist for their license number and check it on the CSLB License Check page. When you are ready, Sacramento Heating and AC can pass your request to local specialists.

Questions people ask

How long does ductwork installation take?

It depends on the size of the home and the access. A small home with easy attic or basement access is the quickest job. A larger or multi-story home, or one where walls and ceilings must be opened, takes longer. Your specialist should give a schedule in the quote and tell you how long the heating and cooling will be off while they work.

What should I ask before I hire someone for ductwork installation?

Ask how they measured the home and sized the ducts, what material and insulation they are quoting and what happens to the old ducts. Ask whether the price includes patching walls or ceilings. Ask for their license number and check it on the CSLB License Check page.

Do I need to be home for ductwork installation?

Usually yes, because the crew needs access to attics, crawl spaces, closets and each room where a vent will go. You should also be available to approve vent locations before anything is cut. Agree on access, pets and furniture moving beforehand.

How do I know I have weak airflow from my ducts?

Signs include rooms that stay hot or cold, weak air from some vents, whistling at registers and high energy bills. Weak airflow can also come from a dirty filter or a blocked vent, so check those first. If they are clear, a specialist can inspect the ducts and the blower to find the cause.

Can I install ductwork myself?

Not as a practical project. Ductwork has to be sized, sealed and connected to the equipment, and mistakes cost efficiency and comfort. Simple checks you can do are changing the filter and clearing furniture or rugs from vents. For anything beyond that, ask a local specialist for a quote.

Where these facts come from

Page updated